One case,
all inside,
no hassle.

Our main set is for 32 kN standard machines (Novopress ACO 201/202/203, REMS Power-Press, Rothenberger Romax 3000/4000, Viega Pressgun, Uponor UP75/UP110). For compact 19 kN or Klauke mini machines we have separate sets on request. Send us brand + model + photo of the jaw mount, we confirm before you order.

⚡ Check your press tool →

All three sets have the same contents: 1 press jaw + 19 inserts, TH (5 sizes), V (5), U (4) and M (5). The only difference is the jaw: the Standard is for 32 kN machines, the Compact for 19 kN and the Standard Mini for 15 kN, with an original Bonfix/Klauke jaw. With every set you can add the UP profile, which is 4 extra inserts (UP16 to UP32). Always including a sturdy storage case.

Each fitting brand uses its own profile, some brands even use multiple types.

Which profile you need depends on two things:

The pipe material: copper and stainless steel are usually pressed with M or V profile, plastic and multilayer with U or TH profile.
The fitting itself: check the fitting for the prescribed profile, or consult the manufacturer.

Some fittings can be pressed with multiple profiles (Bonfix for instance works with up to 6 different profiles).

See also the downloads section for a PDF with all sizes and brands.

UP is the profile for Uponor S-Press Plus and Uni Pipe Plus. It is not in the standard set, but available as the UP version.

⚡ Check your fitting →

Yes, we ship throughout the EU, shipping is free across the entire EU, including Germany. Delivery usually within one week via DPD or DHL.

Yes, an invoice is available on request. No VAT is charged.

After your inquiry you'll receive a personal email with payment options: PayPal (international), SEPA bank transfer (preferred for business and EU customers), or iDEAL/instant transfer. Choose what's easiest for you. Once payment is received, we ship within 24 hours, also on weekends.

No problem - send it back, we'll send a fitting jaw. Avoid the back-and-forth by providing your press tool brand and model in advance (photo of jaw mount helps). Then we can ship the right set immediately.

A press profile is a specific shape in the insert that matches the fitting. The manufacturer marks the profile (TH, V, U, M or UP) with the size on the fitting. Example: TH 16 means you need a TH insert in size 16. This is how the profiles differ in shape. H is not in our set, UP is available as an option.

That depends on the Viega system. Profipress (copper) and Sanpress (stainless steel) are pressed with the V profile, which is included in our set.

What matters more is what else you can do with it. Your Viega Pressgun is not tied to Viega: it is simply a 32 kN machine with the common jaw mount. Our set turns it into a universal machine. The same base jaw then also presses Henco and Bonfix (TH), Uponor MLC and VSH MultiPress (U), and Geberit Mapress and VSH XPress (M). One case in the van and you can take on any job, whatever pipe system the customer has.

Two things to know. Sanfix Fosta (multilayer pipe) requires Viega’s own VP contour, we do not supply that and there is no approved alternative, so always check which Viega system you have. And if you see PT1, PT2 or PT3 on a Viega jaw: that code only tells you which generation of Viega machine the jaw fits, not which profile it presses. Our set is independent of that: it fits the Viega Pressgun and every other standard 32 kN machine.

They look alike but are not identical. The U profile is the universal base design used by several brands, such as Wavin Tigris and older Uponor systems. Uponor developed the UP profile further for their newer S-Press Plus fittings up to 32 mm, with slightly shifted pressing surfaces matched to the O-rings and the test safety of Uponor. A UP insert also presses every fitting that calls for U. The other way round is more critical: a U insert does not always seat properly on the newest S-Press Plus fittings because of the thicker stop rings. In doubt, choose UP. U profile on the left, UP on the right. Top: a regular U insert, not for Uponor S-Press Plus. Bottom: the UP insert with the notch for Uponor. It also presses regular U fittings such as Wavin and VSH.

No, that's harmless. Original press jaws are cast in one piece, so the pressing contour runs through without interruption. With non-original jaws you therefore more often see a slight ridge on the parting line, where the jaw halves meet. It's a cosmetic difference, not a sign that anything is wrong with the press. As long as your machine completes the pressing cycle without an error, the connection is fine: the seal sits inside on the O-ring, the outside plays no part in it.